Our Dragman slurry layflat hose is an agricultural umbilical drag hose. The hose is a high quality Thermoplastic polyester based polyurethane (TPU) extruded through the weave giving a ‘Unified’ construction. Engineered with extreme tensile stress and excellent abrasion resistance, 4-5 times that of commonly used rubber hose.

Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The smooth surface and low friction loss for a long service life with minimal maintenance requirements.

The Dragman slurry hose is characterised by its large diameter and extension stability and low kink radius.

The Dragman slurry hose is used in the agricultural industry, designed to be connected to the slurry source and then to the spreader vehicle and dragged along as an umbilical system. If you are unsure of this products suitability for your requirements please contact one of our expert team for advise.

If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.

Hose Jacket & Lining: 
The hose jacket is a 100% high tenacity polyester yarn. The unified construction is made of a high quality thermoplastic polyester based polyurethane (TPU). Resistant to ozone and to external contact with oil products. The inner lining guarantees a smooth surface and low friction loss.

Hose Lengths:
Standard lengths up to 200m. Longer lengths are available on request for diameters lower than 6’’.

The Dragman slurry hose has a very high pressure rating and the recommended coupling system would be the Storz 3 part segmented binding option. They can be simply fitted or removed on site without the need for specialised equipment or tools.

Description

Our Dragman slurry layflat hose is an agricultural umbilical drag hose. The hose is a high quality Thermoplastic polyester based polyurethane (TPU) extruded through the weave giving a ‘Unified’ construction. Engineered with extreme tensile stress and excellent abrasion resistance, 4-5 times that of commonly used rubber hose.

Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The smooth surface and low friction loss for a long service life with minimal maintenance requirements.

The Dragman slurry hose is characterised by its large diameter and extension stability and low kink radius.

Application

The Dragman slurry hose is used in the agricultural industry, designed to be connected to the slurry source and then to the spreader vehicle and dragged along as an umbilical system. If you are unsure of this products suitability for your requirements please contact one of our expert team for advise.

If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.

Specification

Hose Jacket & Lining: 
The hose jacket is a 100% high tenacity polyester yarn. The unified construction is made of a high quality thermoplastic polyester based polyurethane (TPU). Resistant to ozone and to external contact with oil products. The inner lining guarantees a smooth surface and low friction loss.

Hose Lengths:
Standard lengths up to 200m. Longer lengths are available on request for diameters lower than 6’’.

Technical Info

The Dragman slurry hose has a very high pressure rating and the recommended coupling system would be the Storz 3 part segmented binding option. They can be simply fitted or removed on site without the need for specialised equipment or tools.

View Fittings & Hardware

HOSE FITTINGS & HARDWARE

All RHL hoses can be supplied with a wide range of nozzles, couplings,
adaptors and valves to meet British and International standards.

Hose Repair

GET IN TOUCH

Our knowledgeable team are here to help. Call us on 01772 651550 or fill out an enquiry form today.