Our Reflex type 1 layflat industrial fire hose is a general purpose all synthetic layflat delivery hose complying with BS 6391 Type 1 international standards. The hose is a two-component system consisting of a black SBR synthetic rubber inner lining and a synthetic polyester outer jacket, bonded together with NBR-synthetic adhesive.

Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The two component lining system guarantees a smooth surface and low friction loss for a long service life with minimal maintenance requirements and easy repair.

The Reflex type 1 layflat fire hose is characterised by its unique high visibility jacket and has a lightweight, flexible and kink resistant structure produced with very low twist and small coil diameter. It is a multipurpose hose suitable for a wide range of industrial applications.

The Reflex Type 1 layflat fire hose is principally used by Municipal and Industrial fire brigades. However it is a multipurpose hose also commonly used within the shipboard and marine industry, on refineries and construction sites, general industrial use and for all wash-down applications.

If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.

Inner Hose: 
The hose jacket is a 100% dyed polyester high tenacity yarn with circular woven, warp threads 3 ply twisted.

Hose Lining: 
The hose lining and cover is a two-component system consisting of a black SBR synthetic rubber inner lining and a synthetic polyester outer jacket, bonded together with NBR-synthetic adhesive. Resistant to ozone and to external contact with oil products. The lining guarantees a smooth surface and low friction loss. The exterior jacket is available in fluorescent yellow or orange for high-vis increased workplace safety.

Hose Lengths:
All standard lengths can be supplied from stock, however RHL specialise in the cutting and assembly of non-standard lengths up to 100 metres long to satisfy customers individual requirements.

Maximum loose hose length is 300 metres and is made to order.

The maximum change in length – 3% The maximum change in diameter – 3%

  • The Reflex Type 1 layflat industrial fire hose has a working temperature range of -30°C to +80°C
  • It Complies with BS 3691 Type 1 (50 bar) International Standards and many others.
  • It can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire.
Description

Our Reflex type 1 layflat industrial fire hose is a general purpose all synthetic layflat delivery hose complying with BS 6391 Type 1 international standards. The hose is a two-component system consisting of a black SBR synthetic rubber inner lining and a synthetic polyester outer jacket, bonded together with NBR-synthetic adhesive.

Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The two component lining system guarantees a smooth surface and low friction loss for a long service life with minimal maintenance requirements and easy repair.

The Reflex type 1 layflat fire hose is characterised by its unique high visibility jacket and has a lightweight, flexible and kink resistant structure produced with very low twist and small coil diameter. It is a multipurpose hose suitable for a wide range of industrial applications.

Application

The Reflex Type 1 layflat fire hose is principally used by Municipal and Industrial fire brigades. However it is a multipurpose hose also commonly used within the shipboard and marine industry, on refineries and construction sites, general industrial use and for all wash-down applications.

If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.

Specification

Inner Hose: 
The hose jacket is a 100% dyed polyester high tenacity yarn with circular woven, warp threads 3 ply twisted.

Hose Lining: 
The hose lining and cover is a two-component system consisting of a black SBR synthetic rubber inner lining and a synthetic polyester outer jacket, bonded together with NBR-synthetic adhesive. Resistant to ozone and to external contact with oil products. The lining guarantees a smooth surface and low friction loss. The exterior jacket is available in fluorescent yellow or orange for high-vis increased workplace safety.

Hose Lengths:
All standard lengths can be supplied from stock, however RHL specialise in the cutting and assembly of non-standard lengths up to 100 metres long to satisfy customers individual requirements.

Maximum loose hose length is 300 metres and is made to order.

The maximum change in length – 3% The maximum change in diameter – 3%

Technical Info
  • The Reflex Type 1 layflat industrial fire hose has a working temperature range of -30°C to +80°C
  • It Complies with BS 3691 Type 1 (50 bar) International Standards and many others.
  • It can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire.
View Fittings & Hardware

HOSE FITTINGS & HARDWARE

All RHL hoses can be supplied with a wide range of nozzles, couplings,
adaptors and valves to meet British and International standards.

Hose Repair

GET IN TOUCH

Our knowledgeable team are here to help. Call us on 01772 651550 or fill out an enquiry form today.