Our Elite PU type 2 layflat supercoated fire hose is a general purpose all synthetic layflat delivery hose complying with BS 6391 Type 2 international standards. The hose is a two-component system consisting of a black SBR synthetic rubber inner lining and a synthetic polyester outer jacket, bonded together with NBR-synthetic adhesive. The hose is finally colour coated in a variety of colour options and given a polyurethane surface increasing the abrasion resistance.

Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The two component lining system guarantees a smooth surface and low friction loss for a long service life with minimal maintenance requirements and easy repair.

The Elite PU fire hose is characterised by its lightweight, flexible and kink resistant structure produced with very low twist and small coil diameter. It is a multipurpose hose suitable for a wide range of applications.

The Elite PU type 2 layflat fire hose is principally used by Municipal and Industrial fire brigades. However it is a multipurpose hose also commonly used within the shipboard and marine industry, on refineries and construction sites, in agriculture and irrigation, general industrial use and for all wash-down applications.

If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.

Hose Jacket: 
The hose jacket is a 100% polyester high tenacity yarn with circular woven, warp threads 2 ply twisted, plain weave.

Hose Lining: 
The hose lining and cover is a two-component system consisting of a black SBR synthetic rubber inner lining and a synthetic polyester outer jacket, bonded together with NBR-synthetic adhesive. Externally colour and polyurethane coated. Resistant to ozone and to external contact with oil products. The lining guarantees a smooth surface and low friction loss.

Hose Lengths:
All standard lengths can be supplied from stock, however RHL specialise in the cutting and assembly of non-standard lengths up to 100 metres long to satisfy customers individual requirements.

Maximum loose hose length is 300 metres and is made to order.

The maximum change in length – 3% The maximum change in diameter – 3%

  • The type 2 layflat Elite PU fire hose has a working temperature range of -30°C to +80°C
  • It Complies with BS 3691 Type 2 (40 bar) International Standards and many others.
  • It can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire.
Description

Our Elite PU type 2 layflat supercoated fire hose is a general purpose all synthetic layflat delivery hose complying with BS 6391 Type 2 international standards. The hose is a two-component system consisting of a black SBR synthetic rubber inner lining and a synthetic polyester outer jacket, bonded together with NBR-synthetic adhesive. The hose is finally colour coated in a variety of colour options and given a polyurethane surface increasing the abrasion resistance.

Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The two component lining system guarantees a smooth surface and low friction loss for a long service life with minimal maintenance requirements and easy repair.

The Elite PU fire hose is characterised by its lightweight, flexible and kink resistant structure produced with very low twist and small coil diameter. It is a multipurpose hose suitable for a wide range of applications.

Application

The Elite PU type 2 layflat fire hose is principally used by Municipal and Industrial fire brigades. However it is a multipurpose hose also commonly used within the shipboard and marine industry, on refineries and construction sites, in agriculture and irrigation, general industrial use and for all wash-down applications.

If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.

Specification

Hose Jacket: 
The hose jacket is a 100% polyester high tenacity yarn with circular woven, warp threads 2 ply twisted, plain weave.

Hose Lining: 
The hose lining and cover is a two-component system consisting of a black SBR synthetic rubber inner lining and a synthetic polyester outer jacket, bonded together with NBR-synthetic adhesive. Externally colour and polyurethane coated. Resistant to ozone and to external contact with oil products. The lining guarantees a smooth surface and low friction loss.

Hose Lengths:
All standard lengths can be supplied from stock, however RHL specialise in the cutting and assembly of non-standard lengths up to 100 metres long to satisfy customers individual requirements.

Maximum loose hose length is 300 metres and is made to order.

The maximum change in length – 3% The maximum change in diameter – 3%

Technical Info
  • The type 2 layflat Elite PU fire hose has a working temperature range of -30°C to +80°C
  • It Complies with BS 3691 Type 2 (40 bar) International Standards and many others.
  • It can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire.
View Fittings & Hardware

HOSE FITTINGS & HARDWARE

All RHL hoses can be supplied with a wide range of nozzles, couplings,
adaptors and valves to meet British and International standards.

Hose Repair

GET IN TOUCH

Our knowledgeable team are here to help. Call us on 01772 651550 or fill out an enquiry form today.