We offer a range of drinking water hoses suitable for short term or temporary bypass applications. We stock hoses with full DWI Reg 31 Approval, WRAS (Water Regulations Advisory Scheme) approval and other hoses suitable for water transfer applications where specific approvals are not necessarily required.

DWI Reg 31 Approved – Drinking Water Hose

Our DWI REG 31 approved general purpose layflat hose is designed specifically for the transfer of drinking water. This hose is used primarily by the Water Authorities and sub contractors but is also suitable for the transfer of drinking water for construction sites, public events and leisure activities.

This high quality, high abrasion resistant hose is designed specifically for providing emergency supply of clean potable water should normal service be interrupted. It is constructed with a strong circular woven jacket that allows the polyurethane to be extruded through the polyester ply weave which fully encapsulates the textile reinforcement making it robust and pliable.The external wall is highly resistant to abrasion, puncturing, oil, ozone, petrochemicals, ultra-violet light and weathering whilst in service.

The DWI REG 31 approved hose is used primarily by the Water Authorities and sub contractors involved in the drinking water sector, it is also suitable for use in the transfer of drinking water for tanks and bowsers to construction sites and for use at leisure and public events and to provide supply to remote applications.

If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.

Hose Jacket & Lining: 
The external wall is highly resistant to abrasion, puncturing, oil, ozone, petrochemicals, ultra-violet light and weathering whilst in service.

Hose Lengths:
Standard lengths of 25m. Other lengths available upon request.

  • The DWI REG 31 approved hose has a working temperature range of -30°C to +80°C
  • It complies with DWI Reg 31 Material Approval.
  • t can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire over synthetic polyester hose guards..
Description

Our DWI REG 31 approved general purpose layflat hose is designed specifically for the transfer of drinking water. This hose is used primarily by the Water Authorities and sub contractors but is also suitable for the transfer of drinking water for construction sites, public events and leisure activities.

This high quality, high abrasion resistant hose is designed specifically for providing emergency supply of clean potable water should normal service be interrupted. It is constructed with a strong circular woven jacket that allows the polyurethane to be extruded through the polyester ply weave which fully encapsulates the textile reinforcement making it robust and pliable.The external wall is highly resistant to abrasion, puncturing, oil, ozone, petrochemicals, ultra-violet light and weathering whilst in service.

Application

The DWI REG 31 approved hose is used primarily by the Water Authorities and sub contractors involved in the drinking water sector, it is also suitable for use in the transfer of drinking water for tanks and bowsers to construction sites and for use at leisure and public events and to provide supply to remote applications.

If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.

Specification

Hose Jacket & Lining: 
The external wall is highly resistant to abrasion, puncturing, oil, ozone, petrochemicals, ultra-violet light and weathering whilst in service.

Hose Lengths:
Standard lengths of 25m. Other lengths available upon request.

Technical Info
  • The DWI REG 31 approved hose has a working temperature range of -30°C to +80°C
  • It complies with DWI Reg 31 Material Approval.
  • t can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire over synthetic polyester hose guards..

Aquaflex – WRAS Approved Drinking Water Hose

Our Aquaflex WRAS approved water hose is a general purpose all synthetic layflat delivery hose complying with BS 6920 WRAS Material Approval. The hose is a two-component system consisting of a transparent polyurethane inner lining and a synthetic polyester outer jacket. An additional blue NBR synthetic rubber exterior coating with ribs is applied for ease of handling and further resistance to abrasion. This hose requires no drying after use.

Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The two component lining system guarantees a smooth surface and low friction loss for a long service life with minimal maintenance requirements and easy repair.

The Aquaflex water hose is characterised by its lightweight, flexible and kink resistant structure produced with very low twist and small coil diameter. It is a multipurpose hose suitable for a wide range of applications.

The Aquaflex WRAS approved water hose is principally used by the Utility Companies. However it is a multipurpose hose also commonly used within the shipboard and marine industry, on refineries and construction sites for the transfer of clean water.

If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.

Hose Jacket: 
The hose jacket is a 100% polyester high tenacity yarn with circular woven, warp threads 2 ply twisted, plain weave.

Hose Lining: 
The hose lining and cover is a two-component system consisting of a transparent polyurethane inner lining and a synthetic polyester outer jacket. The external coating is a high quality ribbed NBR synthetic rubber, resistant to ozone and to external contact with oil products. The lining guarantees a smooth surface and low friction loss.

Hose Lengths:
All standard lengths can be supplied from stock, however RHL specialise in the cutting and assembly of non-standard lengths up to 100 metres long to satisfy customers individual requirements.

Maximum loose hose length is 300 metres and is made to order.

The maximum change in length – 3% The maximum change in diameter – 3%

  • The Aquaflex WRAS approved water hose has a working temperature range of up to 23°C
  • It complies with BS 6920 WRAS Material Approval.
  • It can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire.
Description

Our Aquaflex WRAS approved water hose is a general purpose all synthetic layflat delivery hose complying with BS 6920 WRAS Material Approval. The hose is a two-component system consisting of a transparent polyurethane inner lining and a synthetic polyester outer jacket. An additional blue NBR synthetic rubber exterior coating with ribs is applied for ease of handling and further resistance to abrasion. This hose requires no drying after use.

Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The two component lining system guarantees a smooth surface and low friction loss for a long service life with minimal maintenance requirements and easy repair.

The Aquaflex water hose is characterised by its lightweight, flexible and kink resistant structure produced with very low twist and small coil diameter. It is a multipurpose hose suitable for a wide range of applications.

Application

The Aquaflex WRAS approved water hose is principally used by the Utility Companies. However it is a multipurpose hose also commonly used within the shipboard and marine industry, on refineries and construction sites for the transfer of clean water.

If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.

Specification

Hose Jacket: 
The hose jacket is a 100% polyester high tenacity yarn with circular woven, warp threads 2 ply twisted, plain weave.

Hose Lining: 
The hose lining and cover is a two-component system consisting of a transparent polyurethane inner lining and a synthetic polyester outer jacket. The external coating is a high quality ribbed NBR synthetic rubber, resistant to ozone and to external contact with oil products. The lining guarantees a smooth surface and low friction loss.

Hose Lengths:
All standard lengths can be supplied from stock, however RHL specialise in the cutting and assembly of non-standard lengths up to 100 metres long to satisfy customers individual requirements.

Maximum loose hose length is 300 metres and is made to order.

The maximum change in length – 3% The maximum change in diameter – 3%

Technical Info
  • The Aquaflex WRAS approved water hose has a working temperature range of up to 23°C
  • It complies with BS 6920 WRAS Material Approval.
  • It can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire.

Aquaman – WRAS Approved Drinking Water Hose

Our Aquaman WRAS approved heavy duty water hose is a general purpose layflat delivery hose complying with BS 6920 WRAS Material Approval. The hose is a high quality thermoplastic polyether based polyurethane (TPU) which is extruded through the weave giving a ‘Unified’ construction. This hose requires no drying after use.

Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The two component lining system guarantees a smooth surface and low friction loss for a long service life with minimal maintenance requirements and easy repair.

The Aquaman heavy duty water hose is principally used by the Utility Companies. However it is a multipurpose hose also commonly used within the shipboard and marine industry, on refineries and construction sites for the transfer of clean water.

If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.

Hose Jacket & Lining: 
The hose jacket is a 100% polyester high tenacity yarn with circular woven warp and weft threads reinforced. The unified construction is made of a high quality thermoplastic polyether based polyurethane (TPU) extruded through the weave. The inner lining guarantees a smooth surface and low friction loss.

Hose Lengths:

All standard lengths can be supplied from stock, however RHL specialise in the cutting and assembly of non-standard lengths to satisfy customers individual requirements.

The maximum change in length – 2%

  • The Aquaman WRAS approved heavy duty water hose has a working temperature range of up to 23°C
  • It complies with BS 6920 WRAS Material Approval.
  • It can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire.
Description

Our Aquaman WRAS approved heavy duty water hose is a general purpose layflat delivery hose complying with BS 6920 WRAS Material Approval. The hose is a high quality thermoplastic polyether based polyurethane (TPU) which is extruded through the weave giving a ‘Unified’ construction. This hose requires no drying after use.

Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The two component lining system guarantees a smooth surface and low friction loss for a long service life with minimal maintenance requirements and easy repair.

Application

The Aquaman heavy duty water hose is principally used by the Utility Companies. However it is a multipurpose hose also commonly used within the shipboard and marine industry, on refineries and construction sites for the transfer of clean water.

If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.

Specification

Hose Jacket & Lining: 
The hose jacket is a 100% polyester high tenacity yarn with circular woven warp and weft threads reinforced. The unified construction is made of a high quality thermoplastic polyether based polyurethane (TPU) extruded through the weave. The inner lining guarantees a smooth surface and low friction loss.

Hose Lengths:

All standard lengths can be supplied from stock, however RHL specialise in the cutting and assembly of non-standard lengths to satisfy customers individual requirements.

The maximum change in length – 2%

Technical Info
  • The Aquaman WRAS approved heavy duty water hose has a working temperature range of up to 23°C
  • It complies with BS 6920 WRAS Material Approval.
  • It can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire.

Aquaflex N – Drinking Water Hose

Our Aquaflex N drinking water hose is a general purpose all synthetic layflat delivery hose. The hose is a two-component system consisting of a white high quality synthetic rubber inner lining and a synthetic polyester outer jacket.

Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The two component lining system guarantees a smooth surface and low friction loss for a long service life with minimal maintenance requirements and easy repair.

The Aquaflex N drinking water hose is characterised by its lightweight, flexible and kink resistant structure produced with very low twist and small coil diameter. It is a multipurpose hose suitable for a wide range of applications.

The Aquaflex N drinking water hose is principally used by the Utility Companies. However it is a multipurpose hose also commonly used within the shipboard and marine industry, on refineries and construction sites for the transfer of clean water.

If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.

Hose Jacket: 
The hose jacket is a 100% polyester high tenacity yarn with circular woven, multiple twisted warp, twill weave.

Hose Lining: 
The hose lining and cover is a two-component system consisting of a white high quality synthetic rubber inner lining and a synthetic polyester outer jacket. The lining guarantees a smooth surface and low friction loss.

Hose Lengths:
All standard lengths can be supplied from stock, however RHL specialise in the cutting and assembly of non-standard lengths up to 100 metres long to satisfy customers individual requirements.

Maximum loose hose length is 300 metres and is made to order.

The maximum change in length – 3% The maximum change in diameter – 3%

  • The Aquaflex N drinking water hose has a working temperature range of -30°C to +80°C
  • It can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire.
Description

Our Aquaflex N drinking water hose is a general purpose all synthetic layflat delivery hose. The hose is a two-component system consisting of a white high quality synthetic rubber inner lining and a synthetic polyester outer jacket.

Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The two component lining system guarantees a smooth surface and low friction loss for a long service life with minimal maintenance requirements and easy repair.

The Aquaflex N drinking water hose is characterised by its lightweight, flexible and kink resistant structure produced with very low twist and small coil diameter. It is a multipurpose hose suitable for a wide range of applications.

Application

The Aquaflex N drinking water hose is principally used by the Utility Companies. However it is a multipurpose hose also commonly used within the shipboard and marine industry, on refineries and construction sites for the transfer of clean water.

If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.

Specification

Hose Jacket: 
The hose jacket is a 100% polyester high tenacity yarn with circular woven, multiple twisted warp, twill weave.

Hose Lining: 
The hose lining and cover is a two-component system consisting of a white high quality synthetic rubber inner lining and a synthetic polyester outer jacket. The lining guarantees a smooth surface and low friction loss.

Hose Lengths:
All standard lengths can be supplied from stock, however RHL specialise in the cutting and assembly of non-standard lengths up to 100 metres long to satisfy customers individual requirements.

Maximum loose hose length is 300 metres and is made to order.

The maximum change in length – 3% The maximum change in diameter – 3%

Technical Info
  • The Aquaflex N drinking water hose has a working temperature range of -30°C to +80°C
  • It can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire.

Aquaflex P – Drinking Water Hose

Our Aquaflex P drinking water hose is a general purpose all synthetic layflat delivery hose. The hose is a two-component system consisting of a white high quality synthetic rubber inner lining and a synthetic polyester outer jacket, bonded together with NBR-synthetic adhesive. The hose is finally colour and polyurethane coated for extra abrasion resistance.

Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The two component lining system guarantees a smooth surface and low friction loss for a long service life with minimal maintenance requirements and easy repair.

The Aquaflex P drinking water hose is characterised by its lightweight, flexible and kink resistant structure produced with very low twist and small coil diameter. It is a multipurpose hose suitable for a wide range of applications.

The Aquaflex P drinking water hose is principally used by the Utility Companies. However it is a multipurpose hose also commonly used within the shipboard and marine industry, on refineries and construction sites for the transfer of clean water.

If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.

Hose Jacket: 
The hose jacket is a 100% polyester high tenacity yarn with circular woven, multiple twisted warp, twill weave. Colour and polyurethane coated for extra abrasion resistance.

Hose Lining: 
The hose lining and cover is a two-component system consisting of a black SBR synthetic rubber inner lining and a synthetic polyester outer jacket, bonded together with NBR-synthetic adhesive. Resistant to ozone and to external contact with oil products. The lining guarantees a smooth surface and low friction loss.

Hose Lengths:
Richards Hose specialise in the cutting and assembly of non-standard lengths up to 100 metres long to satisfy customers individual requirements.

Maximum loose hose length is 300 metres and is made to order.

The maximum change in length – 3% The maximum change in diameter – 3%

  • The Aquaflex P drinking water hose has a working temperature range of -30°C to +80°C
  • It can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire.
Description

Our Aquaflex P drinking water hose is a general purpose all synthetic layflat delivery hose. The hose is a two-component system consisting of a white high quality synthetic rubber inner lining and a synthetic polyester outer jacket, bonded together with NBR-synthetic adhesive. The hose is finally colour and polyurethane coated for extra abrasion resistance.

Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The two component lining system guarantees a smooth surface and low friction loss for a long service life with minimal maintenance requirements and easy repair.

The Aquaflex P drinking water hose is characterised by its lightweight, flexible and kink resistant structure produced with very low twist and small coil diameter. It is a multipurpose hose suitable for a wide range of applications.

Application

The Aquaflex P drinking water hose is principally used by the Utility Companies. However it is a multipurpose hose also commonly used within the shipboard and marine industry, on refineries and construction sites for the transfer of clean water.

If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.

Specification

Hose Jacket: 
The hose jacket is a 100% polyester high tenacity yarn with circular woven, multiple twisted warp, twill weave. Colour and polyurethane coated for extra abrasion resistance.

Hose Lining: 
The hose lining and cover is a two-component system consisting of a black SBR synthetic rubber inner lining and a synthetic polyester outer jacket, bonded together with NBR-synthetic adhesive. Resistant to ozone and to external contact with oil products. The lining guarantees a smooth surface and low friction loss.

Hose Lengths:
Richards Hose specialise in the cutting and assembly of non-standard lengths up to 100 metres long to satisfy customers individual requirements.

Maximum loose hose length is 300 metres and is made to order.

The maximum change in length – 3% The maximum change in diameter – 3%

Technical Info
  • The Aquaflex P drinking water hose has a working temperature range of -30°C to +80°C
  • It can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire.
View Fittings & Hardware

HOSE FITTINGS & HARDWARE

All RHL hoses can be supplied with a wide range of nozzles, couplings,
adaptors and valves to meet British and International standards.

Hose Repair

GET IN TOUCH

Our knowledgeable team are here to help. Call us on 01772 651550 or fill out an enquiry form today.